Heating equipment can be complex. If one component fails, the whole system is affected. Canton Furnace Repair technicians will help you find the root of the most difficult furnace issues.

These are the most frequent reasons to contact Canton Furnace Repair for an emergency furnace repair:

The furnace isn't turning on.
The pilot light is gone.
During the process of startup and operation, odd sounds are heard from the furnace.
The main burner will not light or won't remain lit for more than three seconds.
The blower does not turn on after the burners are lit.
The furnace's blower will always be on.

No matter which manufacturer you have your furnace from, our technicians can fix any model or make. We are so confident in our ability get your furnace back up and running that we offer a 100% satisfaction warranty. Here are some of the furnace repairs that we can do:

Burner Repair
Fan Belt Replacement
Fan Blade Repair
Blower Motor Replacement
Thermostat Recalibration
Electric Repair
And More!

If you are unsure of replacing or repairing your vehicle the technicians from our company will go over the options available to you. Our No Surprises Pricing--including pricing per job, not by the hour--means the price we quote you is the amount you will pay. If you decide that changing your furnace is the right option then we'll replace it with a more efficient model in its place.

Are you fed up with dealing with an unresponsive furnace? Or, maybe the heating unit is heating a portion of the rooms in your home? Whether you need a new heating system installed or an existing unit repaired There's just one name you need to remember: Canton Furnace Repair. With more than 60 years of experience dealing with Canton's heating problems, Canton Furnace Repair has the experience and knowledge to help you get any heating problem diagnosed and addressed quickly and efficiently.

The cold of Canton, GA isn't patient. It is essential to find an HVAC contractor that is trustworthy for furnace repair all winter. At Canton Furnace Repair Our team at Canton Furnace Repair is committed to every furnace repair and is well-versed in how to handle each heating issue that may arise this winter. We don't allow any furnace issue to linger, even if it causes health and safety issues. Canton Furnace Repair can assist you when your furnace is experiencing problems and needs repair.

Furnace won't kick on? We have done all the troubleshooting. Below we've listed the most common reasons furnaces don't work.

Do any of these issues and related symptoms mirror your furnace's issue?

No power to the furnace If the furnace's fan isn't responding to increasing the temperature of the thermostat the breaker could have tripped, the wiring could be loose or the furnace switch might be off. The more complicated issues could be related to problems with the thermostat, transformer control board, run capacitor, or the blower motor. To pinpoint the problem and provide a solution, technicians can perform an assessment.
A failing motor You may be hearing squeaks and squeals from a motor which is on the verge of failing. The immediate attention of technicians is needed to save the furnace from crashing.
No ignition - In furnaces with spark ignitions, loud clicking sounds indicate that the burner attempts to ignite. If it can't ignite it could be due to a blocked flue, faulty control board, or improper limit control. These parts can be repaired or replaced to solve the problem.
Main burner issues Burners that aren't lighting up are typically caused due to dirty flame sensors, clogged condensate drainages, or in condensing furnaces, poor quality flame sensors. If the burners don't light even a little and the gas supply is not working, it could be cut off. Our technicians are able to address this issue by cleaning the area and making few adjustments.
Issues with the run capacitor or motor The causes of these issues are the blower to not switch off after the burners have ignited. The capacitor can easily be replaced, while issues with the motor may require a bit more troubleshooting.
Filter clogged If your thermostat isn't set to “on,” which causes the blower to turn continuously on, then a clogged filter could be the primary reason for why the blower motor is constantly running. Limit switch that senses the temperature of the furnace could be damaged by the restricted airflow. A Canton Furnace Repair technician will not just replace the switch, they will also identify the issue. If a blocked filter is at the root of the issue, your technician will show you how to clean your air filter.

The furnace that is broken can produce odd noises, switch on/off often, or smell unpleasant after being turned on. We'd like to make repairs for furnaces within Canton, GA as easy and hassle-free as it can be. We'll properly diagnose the cause of the problem so that we can complete the repair efficiently. We'll provide you with alternatives and give you sound advice.

Technicians with experience will:

Arrive punctually to their appointments
Professionalism is essential.
Respect your home and treat it with respect
Once you're finished, clean up thoroughly

Your furnace could be causing greater energy costs if it isn't functioning properly. We make it easy to get small problems resolved to ensure you have confidence in your furnace.

Areas we server: 30114, 30115

Search Tools: Canton, GA customers have found us by searching: emergency furnace repair in 30114, 24 hour furnace repair in 30114, 24/7 furnace repair in Canton, furnace service in 30114, gas furnace repair in Canton GA, electric furnace repair in 30114