Emergency Furnace Repair in Canton, ME, 04221 - Heating Repair Services

Canton Furnace Repair

We provide complete service of furnace repair, replacement Canton, ME. We are available 24/7 for furnace service Canton, Maine.

Phone : 888-616-3026

FEATURED


Do you need an Emergency Furnace Repair Service in Canton, ME?

Heating equipment can be complex. If one component fails, the entire system can be affected. Canton Furnace Repair technicians will help you get to the bottom of even your most vexing furnace issues.

These are the most popular reasons to contact Canton Furnace Repair for an emergency furnace repair:

  • The furnace isn't turning on.
  • The pilot light is out.
  • During the process of startup and operation, odd sounds can be heard from the furnace.
  • The main burner will not light, or stay lit for more than three seconds.
  • The blower is never turned on after the burners are ignited.
  • The furnace blower is always on.

You don't want to live without heat during the harsh Canton winters. But, you may not always have a say in the issue. The problem with furnaces that fail are often the result of aging products or other circumstances that are not anticipated that make your home susceptible to extreme low temperatures.

To protect your home and ensure your family is comfortable, you should employ a reputable heating company to offer you the Canton furnace repair. We are Canton Furnace Repair, we are a BBB-accredited company with over 45 years of expertise. Therefore, you can rest assured that your job is in good in our hands.

Are you fed up of having to deal with an unresponsive furnace? Maybe your heating unit only provides heat to a portion of your home. Canton Furnace Repair is the name you need to know regardless of whether you require a heating unit installed or repaired. Canton Furnace Repair has more than 60 years of expertise in solving Canton's heating issues.

In Canton, ME the cold is waiting for nobody. This is why it's essential to have an experienced HVAC contractor on-hand for furnace repairs during the winter months. Our team at Canton Furnace Repair takes furnace repairs very seriously and is well-equipped to handle any heating problems that could occur this winter. We will not allow any furnace issue to linger even if it creates danger to health or safety. If your heater is experiencing problems and you're in the need of a repair to your furnace, give Canton Furnace Repair the call immediately.

Furnace won't kick on? We've done all the troubleshooting. Below we've listed the primary causes furnaces cease to work.

Are any of these problems and related symptoms match your furnace's issue?

  • There is no heating power - If the furnace's fan isn't responding to increasing the temperature of the thermostat the breaker could be tripped, wiring could be loose, or the furnace switch could be turned off. The more complicated issues could be related to problems with the transformer, thermostat controller board, run capacitor, or blower motor. To pinpoint the problem and suggest a solution a technician can conduct an assessment.
  • Failing motor - You might be experiencing squeaks or noises from a motor which is on the verge of failing. A quick response from an engineer is needed to save the furnace from breaking down.
  • No ignition - In furnaces with spark ignitions, loud clicking sounds indicate that the furnace attempts to ignite. If it can't ignite, there may be a blocked flue, faulty control board, or an ineffective limit control. Repairing or replacing these parts will fix the issue.
  • Main burner issues Burners that don't light up are usually caused due to filthy flame sensors, clogged condensate drainages or, condensing furnaces with poor quality flame sensors. If the burners don't light in any way and the gas supply is not working, it could be cut off. To fix this, our technicians should be able to simply clean the important components and make a few adjustments.
  • Problems in the motor or run capacitor - The blower is unable to stop working after the burners have ignited. Motor problems could require troubleshooting. The capacitor can be easily repaired.
  • Clogged filter If the thermostat isn't set to “on,” which means that the blower motor is turned continuously on A clogged filter could be the reason why the motor is running continuously. The restricted airflow may be causing damage to the limit switch that senses the internal furnace temperature. An Canton Furnace Repair technician will not just replace the switch, the technician will also identify the issue. If a blocked filter is at the root of the issue the technician will instruct you how to replace your air filter.

Canton Furnace Repair is the best furnace repair and maintenance company in Canton, ME. We've helped thousands of customers throughout the decades. We are certified, insured and extremely knowledgeable. Trane Comfort Specialist. We are available 24/7 for emergencies with furnace repair because we know how important it is to keep your family warm.

At Canton Furnace Repair we're big enough to be able to accommodate and yet smaller enough to take care. We are committed to ensuring that our customers are completely satisfied with all services we offer. To receive prompt and efficient service, call Canton Furnace Repair if you have an issue with your furnace in Canton, ME.





Areas we server: 4221

Search Tools: Canton, ME customers have found us by searching: emergency furnace repair in 04221, 24 hour furnace repair in Canton Maine, 24/7 furnace repair in Canton, furnace service in 04221, gas furnace repair in Canton Maine, electric furnace repair in 04221
Call Now to Get FREE Estimate