Emergency Furnace Repair in Puckett, MS, 39042 - Heating Repair Services

Need an Emergency Furnace Repair Service in Puckett, MS?

Heating equipment is complex and, when one part malfunctions, it impacts the whole system's ability operate. Puckett Furnace Repair technicians can help to solve the most challenging furnace issues.

These are the most frequent reasons to call Puckett Furnace Repair for an emergency furnace repair:

• The furnace won't turn on.
• The pilot light is gone.
• Strange noises are coming from the furnace during start-up or during operation.
• The main burner won't light or won't remain lit for more than three seconds.
• Once the burners are ignited after which the blower won't start to turn on.
• The furnace's blower will always be on.

Furnaces are made to last and be reliable, but they can be prone to breaking down. Over time wear and tear can cause parts to break, and damaged components make your system stop working. Your system will eventually experience a problem. It is impossible to stop this from happening. It's not clear what type of problem you may encounter.

Our team is able to identify and repair any issue with your furnace including:

• Air filter that is dirty or clogged
• Heat exchanger damage
• Ignition system failure
• Improper airflow in ductwork
• Failure of the limit switch
• Blower fan problems
• Electrical issues
• A thermostat that is not working

Our group of Puckett repair specialists for furnaces from Puckett Furnace Repair can handle all of these problems and more. We know you want a team you can rely on, so we're up to the task. Whether you have a brand-new modern, high-tech system that requires repairs or maintenance or an older unit that is nearing its end life, we can find a repair solution that keeps your heating system in good working order and keeps you comfortably throughout the heating season.

Never take a first offer. Look for other offers. Anyone who's had a furnace serviced knows the dangers of some companies charging inflated costs. That is why we offer an absolutely free second opinion. If you have already had a competing furnace repair company in Puckett, MS or the suburbs give you a written estimate, call us and we will visit and provide our diagnosis for free.

A majority of businesses will offer a service call fee just to come out. We'll examine your unit and then either confirm the initial problem, or perhaps find a better and more affordable solution. You're not risking anything by calling us today for any furnace repair needs.

Furnace won't kick on? We've done all the troubleshooting. Below, we've listed the most common reasons furnaces don't work.

Are any of these problems and related symptoms match your furnace's problem?

• No power to the furnace - If the furnace's fan isn't responding to a change in temperature the breaker could have tripped, or the wiring could be loose or the furnace switch might be off. A problem with the thermostat or control board, or the blower motor could lead to more complex issues. Technicians can conduct a diagnostic test to pinpoint the problem and then come up with a solution.
• Failing motor You may be hearing squeaks and squeals from a motor that is on the verge of failing. To save your furnace from burning it is essential immediately call an engineer.
• There is no ignition In furnaces equipped with spark ignitions, loud clicking sounds are an indication that the burner is attempting to ignite. It could not be able to ignite because of a blocked flue or a defective control board. These components can be fixed or replaced to correct the issue.
• Main burner issues - Burners that won't stay lit are most commonly caused due to dirty flame sensors or - in condensing furnaces--clogged condensate drains. The gas supply may be cut if the burners don't switch on in any way. Our technicians will be able to fix this by cleaning the burners and making a few adjustments.
• Issues with the run capacitor or motor This can cause the blower to not turn on after the burners ignite. The capacitor can be easily repaired, while issues with motors might require more troubleshooting.
• Clogged filter If your thermostat isn’t set to “on,” which causes the blower to turn always on A clogged filter could be the main reason why the motor is running continuously. The restricted airflow may have caused damage to the limit switch, which detects the furnace's internal temperature. A Puckett Furnace Repair technician will not only replace the switch; they will also identify the issue. If a blocked filter is the reason the technician will instruct you how to replace the air filter.

It's a question we've all probably been asked from time to the other. It's likely to prompt you to seek emergency heating service right away. There are a few options that you need to consider before you take action. Before you look for 24-hour furnace repair, consider these suggestions:

1. Examine the thermostat. Sometimes the controls can be moved, and sometimes the family member may be laughing. Make sure your thermostat is correctly set prior to calling for heating repair.
2. Check your air filter. Restrictions in air flow can cause the furnace to run in a poor way and eventually cause overheating (and a subsequent shutdown). This is the most common reason for this frequent problem.
3. If you're using gas, make sure you check the pilot. The pilot must be first examined whenever a homeowner attempts to repair a gas furnace. You should make sure the furnace is on and that it is burning blue (orange signifies that it has burned impurities). If it's not the case, reset it prior to calling in for repairs.

Communities we server: 39042, 39114, 39151

Search Tools: Puckett, MS customers have found us by searching: emergency furnace repair in Puckett, 24 hour furnace repair in Puckett, 24/7 furnace repair in Puckett, furnace service in Puckett MS, gas furnace repair in Puckett MS, electric furnace repair in 39042